- Minbo Cai, Xiaoping Li, Mustafizur Rahman:
Molecular dynamics modelling and simulation of nanoscale ductile cutting of silicon.
- Jing Ying Zhang, John B. Morehouse, Steven Y. Liang, Jun Yao, Xiaoqin Zhou:
Handling constraints for manufacturing process optimisation using genetic algorithms.
- Zhe Qin, Chengyong Wang, Yisong Lin, Yinning Hu:
Optimisation of tool angles and the relation between tool path and cutting force in high-speed milling with micro-end-mill.
- G. Partheepan, Swadesh Kumar Singh, D. K. Sehgal, R. K. Pandey:
Numerical investigations of constitutive tensile behaviour of materials and wrinkling of cold-rolled aluminium sheet when deep drawn through a Tractrix die.
- Caihua Xiong, Yiming Kevin Rong, Yong Tang, You-Lun Xiong:
Fixturing model and analysis.
- Gene Y. Liao:
Employing shimming for clamping compliant sheet-metal parts.
- Laine Mears, Francis M. Kolarits, Michael Thompson, Thomas R. Kurfess:
Design of a flexible centring tooling system.
- Y. Tang, Han Tong Loh, Jerry Y. H. Fuh, Yoke San Wong, L. Lu:
Direct laser sintering of Cu-based metal for rapid tooling.
- Zuo Dunwen, Kawano Yoshihiro:
Application of projection image of end mill to monitor its behaviour.
- Huaizhong Li, Xiaoqi Chen, Hao Zeng, Xiaoping Li:
Embedded tool condition monitoring for intelligent machining.
- Yan Luo:
An algorithm implementation for tool wear of HSC.
- V. Krishnaraj, S. Vijayarangan, A. Ramesh Kumar:
Effect of drilling parameters on mechanical strength in drilling glass fibre reinforced plastic.
- Alfred Avanessian, Yiming Kevin Rong, G. Tan:
Analysis of influential effect of 3D groove design on up-curl dominated machining chip breaking.
- Ming Chen, Gang Liu, Lulu Jing, Jingwen Zhong, Fanghong Sun:
Studies on the specific drills for austenitic stainless steel 1Cr18Ni9Ti.
- Zhigang Wang, Zhengjia Li, Yaonan Cheng, Shiyou Ning:
Analysis and design of PCD milling tool for machining copper alloy materials.
- Shichang Du, Lifeng Xi, Ershun Pan, Jianjun Shi, Jun Ni, C. Richard Liu:
Diagnosability study for quality improvement based on distributed sensing and information technology.
- Kit F. Pun, Clement K. Sankat, Man-Yin R. Yiu:
Towards formulating strategy and leveraging performance: a strategic information systems planning approach.
- Andrew Kusiak:
Innovation science: a primer.
- PohWah Khong, RongMing Ren:
User acceptance of information technologies for enterprise development.
- Chiung-Fen Huang, Ruey-Shun Chen:
Application of new Apriori algorithm MDNC to TFT-LCD array manufacturing yield improvement.
- Craig B. Chapman, S. Preston, Martyn Pinfold, G. Smith:
Utilising enterprise knowledge with knowledge-based engineering.
- C. K. M. Lee, George T. S. Ho, Henry C. W. Lau, Felix T. S. Chan:
A generic framework to achieve complex data exchange in an industrial environment.
- George T. S. Ho, Henry C. W. Lau, C. K. M. Lee, Andrew W. H. Ip:
A flexible information management system for supporting manufacturing activities.
- Henry C. W. Lau, Cassandra X. H. Tang, George T. S. Ho, C. K. M. Lee:
Design and implementation of an object-oriented information management system.
- Henry C. W. Lau, George T. S. Ho, E. N. M. Cheng, Andrew Ning, C. K. M. Lee:
Benchmarking of optimisation techniques based on genetic algorithms, tabu search and simulated annealing.
- Alexandra M. Mertens, Kaj-Mikael Björk:
Measuring the performance and evaluating the improvements of a fine paper supply chain.
Copyright © Mon Nov 2 21:38:24 2009
by Michael Ley (firstname.lastname@example.org)
- Lon-Chen Hung, Hung-Ping Lin, Hung-Yuan Chung:
New adaptive fuzzy sliding-mode control for uncertain non-linear systems.
- R. Sharma, O. P. Sha:
A tracing method for parametric Bezier triangular surface/plane intersection.
- Hung-Yuan Chung, Lon-Chen Hung:
Design of an adaptive neural sliding-mode controller for seesaw systems.
- Xin-qin Gao, Zong-bin Li:
Conceptual design of mechanisms based on polychromatic sets.
- Massimo Cavacece, Pier Paolo Valentini, Leonardo Vita:
An investigation on fatigue failure of turbine blades of aircraft engines by high cycles fatigue test.
- Shibendu Shekhar Roy:
An application of the adaptive neuro-fuzzy inference system for prediction of surface roughness in turning.
- P. Ji, Francis K. H. Lau, Lili Jiang, Min Li, Zhongbin Li:
Computer-aided generation of fixture configuration design using polychromatic sets.
- Kasthurirangan Gopalakrishnan, Naga Shashidhar:
Characterising the aggregate structure variations in asphalt concrete during compaction using computer automated imaging techniques.
- Jia-Sheng Hu, Mi-Ching Tsai:
Model reference approach to a force feedback joystick in PC video games.