14. ESM 2000:
Ghent,
Belgium
Rik Van Landeghem (Ed.):
14th European Simulation Multiconference - Simulation and Modelling: Enablers for a Better Quality of Life, May 23-26, 2000, Ghent, Belgium.
SCS Europe 2000, ISBN 1-56555-204-0 
@proceedings{DBLP:conf/esm/2000,
editor = {Rik Van Landeghem},
title = {14$^{\mbox{th}}$ European Simulation Multiconference - Simulation and Modelling:
Enablers for a Better Quality of Life, May 23-26, 2000, Ghent,
Belgium},
booktitle = {ESM},
publisher = {SCS Europe},
year = {2000},
isbn = {1-56555-204-0},
bibsource = {DBLP, http://dblp.uni-trier.de}
}
Keynote Speeches
Simulation Methodology and Tools
Simulation Tools
Simulation Methodology
- Kai Pixius, Hans-Peter Menzler, Uwe Krosta:
A common access to the high level architecture (HLA) utilizing design patterns.
33-37
- Gerrit K. Janssens, Kenneth Sörensen:
On the validity of generating gamma variates through the generalized lambda distribution.
38-42
- Edjair de Souza Mota, Adam Wolisz, Krzysztof Pawlikowski:
Comparing overlapping batch means and standardized time series under multiple replications in parallel.
43-48
- Jouni Ikonen, Jari Porras:
Automatic load distribution for conservative distributed simulation.
49-53
- Joanna K. Hartley:
Increasing the efficiency of simulation algorithms through parallel processing.
54-58
- Johannes Lüthi, Clemens Berchtold:
Concepts for dependable distributed discrete event simulation.
59-66
- Ivan Bruha, Frantisek Franek, Vladimir L. Rosicky:
The simulation of business rules in active databases using expert system approach.
67-71
- Colin Brain:
Lies, Damn Lies and computer simulation.
72-76
- Stéphane Galland, Frédéric Grimaud, Jean-Pierre Campagne:
Methodological approach for distributed simulation: general concepts for MA MA-S.
77-82
- Mauricio Marín:
An evaluation of conservative protocols for Bulk-Synchronous parallel discrete-event simulation.
83-90
- Dimosthenis Anagnostopoulos:
Handling system variability in real time discrete event experimentation.
91-96
- Ulrich Klehmet:
Logic based extensions of stochastic process algebras for high-level performance modeling and evaluation.
97-101
- Carsten Böke, Markus Hübel, Franz J. Rammig, Carsten Rust:
Zero-overhead Pr/T-Net execution.
102-107
Theoretical Models
- Panajotis Katsaros, Constantine Lazos:
Regenerative queuing network distributed simulation.
109-113
- J. Savkovic-Stevanovic:
An integrated evolutionary model development.
114-116
- Aziz Naamane, A. Damiba, Norbert Giambiasi:
Generalized DEVS vs Continuous models.
117-120
- Renata Spolon Lobato, Marcos José Santana, Regina Helena Carlucci Santana:
A methodology for performance evaluation of optimistic distributed simulation synchronization mechanisms.
121-125
- Janis Grundspenkis:
Integration of structural model-based causal reasoning and event tree simulation.
126-128
- Alfredo Anglani, Pierpaolo Caricato, Antonio Grieco, Francesco Nucci, Andrea Matta, Quirico Semeraro, Tullio Tolio:
Evaluation of capacity expansion by means of fuzzy-DEVS.
129-133
- Hoda S. Abdel-Aty-Zohdy, Robert L. Ewing:
Smart system neural networks and genetic algorithms for information fusion.
134-139
- Alfredo Anglani, Antonio Grieco, Emanuela Guerriero, Francesco Nucci, Quirico Semeraro, Tullio Tolio:
Object-Oriented simulation models based on the DEVS formalism.
140-144
- V. Malugin, Yu Kharin, D. Murin:
System of econometric modelling and prediction.
145-148
- Norbert Th. Müller:
An analysis of the LRE-Algorithm using Sojourn times.
149-153
- Gordan Gledec:
Modeling transactional applications with distributed objects.
154-158
Verification and Validation of Simulation Models
Control Engineering and Artificial Intelligence
Modeling Physical Devices
- Emad S. Addasi:
Universal mathematical model of motor drives.
181-185
- Bogumila Mrozek, Zbigniew Mrozek:
Modelling and fuzzy Zbigniew Mrozek.
186-190
- Abdullah Al-Odienat:
Mathematical modeling of synchronous motor dynamic modes under stochastic processes.
191-195
- Saleh Al-Jufout:
Computational modeling for solid-state variable-frequency induction motor drive.
196-200
- K. Lipinski, P. Fisette:
A multibody loop constraints approach for modelling the Wheel/Ground rigid contact of rolling systems.
201-207
System Identification
Vehicle Traffic Modelling
Robotics and NC Machines
Continuous Systems Modeling
Application in Industry and Services
Simulation tools in industry
Industry Cases
- Alexandre Dolgui, Oleg Zaikin:
Queueing network models for a capacity allocation problem.
315-317
- Stefan Scherber, Konrad Wöllhaf, Christian Müller-Schloer:
An industrial approach for the simulation of complex heterogeneous systems.
318-322
- Petar Stanojevic, Vasilije Miskovic, Vladimir Bukvic:
Maintenance systems organizational structure designing methodology based on modeling and simulation.
323-325
- Lenin Lemus, David de Andrés, Pedro J. Gil:
An alternative to unify performance and reliability analysis of industrial applications.
326-330
- John Fogelholm:
Anticipated resource consumption modelling i the production process as the basis for simulation activities in paper Mills.
331-334
- Graciela Bueno, Enrique Arjona-Suarez, Lourdes Santiago-Zaragoza:
A simulator of production planning in a corn flour facility in Atlacomulco, Mexio.
335-339
- Belkacem Ould Bouamama, Jean-Philippe Cassar:
Integrated bond graph modelling in process engineering linked with economic systems.
340-347
- Bence Zoltan Árendás:
Reorganising a bus factory for better performance with simulation.
348-352
Cases in Electronic Design
Cases in Service Companies
- Patrick Beullens, Dirk Van Oudheusden:
Throughput time reduction in a self-service restaurant: the free flow case.
367-374
- Ivo Vondrák:
Business process modeling and simulation for quality management.
375-379
- Rik Van Landeghem, A. Beuselinck:
Analysis of passenger boarding in airplanes using simulation.
380-385
- T. S. Baines, J. M. Kay, John Ladbrook:
Modelling the behaviour of people at work.
386-392
- Martin Bichler, Hannes Werthner:
Simulation of multidimensional procurement auction.
393-397
- Leonid Novitsky, Vasily Ragozin, Elena Victorova:
Integrated information system design based on the modeling of insurance business process.
398-400
- Päivi Haho, Riitta Smeds, Esa Soppi, Aino Takala:
Evolutionary method for the development of the R&D process in pharmaceutical industry.
401-406
Supply Chain Management and Logistics
Transportation Systems
Supply Chain Planning & Control
- Eugene A. M. Schenk:
Supply chain dynamics with production priority settings.
445-451
- Wilfried Sihn, Jörg Pirron, Ute Mussbach-Winter:
IT-Supported supply chain management - new perspectives.
452-454
- Barbara Belpaire, Rik Van Landeghem, Julia Petuhova:
Implementing a cost model in a textiles supply chain using simulation.
455-460
- Xudong Xie, Arun Kumar:
Simulation based optimal configuration of distribution channel in supply chain.
461-465
- Agostino G. Bruzzone, Pietro Giribone, Roberto Revetria:
Using simulation to re-engineer the supply chain in automotive production.
466-470
- Luís Brito, Paulo Novais, José Neves:
A general agent-based architecture for production planning i electronic commerce scenarios.
471-475
- Roberto Mosca, Alessandra Frigato Bonello, Flavio Tonelli:
A distributed model of interconnected simulators to control the supply chain in a stochastic configuration.
476-480
- Michel Gourgand, Philippe Lacomme, Nikolay Tchernev:
Simulation based scheduling with WIP consideration for FMS using trip-based material handling systems.
481-488
Communications and Networks
Simulation Network Traffic
- Paulo José de Freitas Filho, Marcelo Maia Sobral:
Traffic Generators for TMN simulation.
493-496
- Alessandro Genco, Antonio Zasa:
Fuzzy traffic shaper for MPEG-4 sequences.
497-501
- Luc Hohwiller, Serge Wendling:
A methodological approach for fieldbus simulation and performance prediction.
502-507
- Paulo José de Freitas Filho, Edson Tirelli:
Development of a template for telecommunications management networks simulation a tool for performance evaluation.
508-512
- Emmanuelle de Gentili, Fabrice Bernardi, Jean François Santucci:
Discrete event modeling of ATM based network.
513-515
- Juan Carlos Olabe, Xabier Basogain, Mikel Olabe:
Video traffic modeling of full-length VBR video for efficient broadband network simulation.
516-520
- Viktor Matic, Alen Bazant, Mladen Kos:
Optimal delay buffer for VoIP applications.
521-525
Communication Networks Management Models
- Ingmar Ahrens, Holger Krisp, Christian Müller-Schloer, Werner van Almsick, Stefan Scherber:
Simulation of the Hybrid telecommunications access system HYTAS for testing the network management system KENOS.
529-534
- Eduard Cristian Popovici, Adrian Constantin, Eugen Borcoci:
Models for configurable mechanisms in multimedia Q0S management - simulation study.
535-538
- Eugen Borcoci, Stanislaw Budkowski:
Wide area network module - for FDT based simulation of multicast communication protocols.
539-542
- Milutin Kapov, Marija Vrdoljak, Ivan Vrdoljak:
Partial buffer sharing scheme: loss thresholds optimization.
543-547
- Felisa J. Vázquez-Abad, Lachlan L. H. Andrew:
Filtered Gibbs sampler for estimating blocking probabilities in WDM optical networks.
548-555
- Alen Bazant, Zeljiko Ilic, Mladen Kos:
Application of discrete Fourier transform to resource allocation in ATM networks.
556-560
Radio Frequency Based Communication
Operations Research in Simulation
Optimization in simulation and queueing systems
- William Conley:
A new philosophical approach to operations research.
583-585
- Jan Studzinski, Lucyna Bogdan:
Computer aided modelling, optimisaton and control of the large municipal water net.
586-588
- Herbert D. Schwetman:
Finding the best system configuration: an application of optimization and simulation.
589-592
- Simonetta Balsamo:
Closed queueing networks with finite capacity queues: approximate analysis.
593-600
Biology,
Medicine & Health care
Cell and Molecular Biology
Modeling and Simulation in Medicine
Modeling the Human Body and Mind
- Jan A. Vierendeels, K. Riemslagh, Erik Dick, Pascal R. Verdonck:
Computer simulation of left ventricular filling flow: determinants of wave propagation velocity.
663-667
- S. Dehandtschutter, O. Verberckmoes, Frans Arickx, Jan Broeckhove:
Efficient control of a musculotendon based human model.
668-670
- Pascal R. Verdonck:
Simulation of cardiac mechanics.
671-675
- Souhila Fekkai, Marwan Al-Akaidi, J. Blackledge:
A comparative study of fractal dimension estimation for speech.
676-680
- Dirk D. De Wachter, Pascal R. Verdonck:
A simulation program for unsteady mass transport in artificial organ systems.
681-685
- Dietmar P. F. Möller, Angelika Berger:
Discrete event simulation based on an artificial neural network simulator.
686-690
Modeling Biological & Environment Systems
Education and Training
Training and Gaming environments
- Andriy Levytskyy, Eugene J. H. Kerckhoffs:
A plain python simulator to control a collaborative environment.
719-727
- Roland Haas:
Capturing and reusing design rationales in modeling, simulation and control.
728-732
- Jan-Torsten Milde:
Lokutor: a communicative agent for intelligent virtual environments.
733-737
- Uffe Thorsteinsson:
Production, simulation, and games in the new millennium.
738-740
- Juan L. Cano, Maria J. Sáenz, Antonio Campos:
Development of a simulation game focused on negotiation training through role-playing in he project management environment.
741-745
- Alexei V. Sioutine:
Investigation of impacts of resources and resource allocation policies on rework iteration in instructional systems development projects.
746-748
Computer Based Training
Late Papers
Copyright © Mon Nov 2 20:34:42 2009
by Michael Ley (ley@uni-trier.de)
